Skip to product information
1 of 8
On Sale!

Fossa Touchless Faucet Adapter Smart Sensor Faucet for Kitchen Bathroom Sink Smart Devices Automatic Infrared Sensor Water Saving Device Anti-Overflow Protection

Fossa Touchless Faucet Adapter Smart Sensor Faucet for Kitchen Bathroom Sink Smart Devices Automatic Infrared Sensor Water Saving Device Anti-Overflow Protection

Description: This faucet uses air injection technology, so that the proportion of air in the process of outlet increases, so that the water is soft and delicate, but also more scour force. At the same...

Type : Sensor Faucet

SKU : SF-001

Availability : In Stock

Regular price Rs. 2,650.00
Sale price Rs. 2,650.00 Regular price Rs. 4,580.00
On Sale! Sold out
Tax included. Shipping calculated at checkout.
Use Code: FOSSA5%

5% off On All Prepaid Orders

View full details

Description: This faucet uses air injection technology, so that the proportion of air in the process of outlet increases, so that the water is soft and delicate, but also more scour force. At the same time, the unused outlet time is reduced, so that the water flow of the nozzle reaches 0.07L/s, which reaches the first water efficiency level, and the monthly water bill becomes less. Parameter: Brand: Fossa Product Weight: 101g Product Size: 60x34x49mm Standby Energy Consumption: ≤0.2mW Working Water Pressure: 0.05-0.8MPa Sensing Range: Side Sensor 0-5cm/Bottom Sensor 0-10cm Water Efficiency: First Level Protection Grade: IPX6 Shell material: ABS Faucet material: stainless steel Charging Method: Micro USB interface Advantages: - Infrared automatic water saver tap, 0.25 seconds fast induction. - Small size and simple design - Water saving, reduce unutilized water discharge time. - Convenient to disassemble and assemble. - Water overflow protection. - IPX6 Waterproof. - Super long battery endurance, Using the USB charging method, the full time is about 3 hours, which can provide up to 6 months of battery life. When the battery is low, there will be a light reminder function. Warm Tip: 6 groups of conversion heads, suitable for common faucets in the market. *Before purchasing, please check whether your faucet model is suitable, or contact customer service to confirm Package Included: 1 x Infrared Induction Water Saving Device For Faucet 1 x Installation Wrench 3 x Seal Rings 6 x Adapters, include( Internal screw adapter M20/M22/G1/2 and External screw adapter M20/M22/M24) 1 x Instructions

About this item

  • 【Smart sensing】Touchless faucet adapter- Just reach out your hand ,All for your convenience .Reach out your hand to be sensed, the water will flow out, no longer need to manually repeat switching faucets. Do not transfer stains to faucets to avoid cross-contamination which gives you a clean life and good feelings.
  • 【Two sensing modes】Upgraded infrared faucet adapter-To help you save water. By easy installation, you can upgrade your common faucet to a smart devices(Touchless Automatic sensing tap.) Bottom and side sensors,two different sensing modes, just 0.25 seconds to use water easily
  • 【Air injection technique 】touchless kitchen sink tap adapter -Air injection technology increases the proportion of air in the process of water out, making the water spray soft and delicate, with more scouring power. At the same time, reduce the time of not being used effectively, so that the water flow rate reached 0.07L/S. Water saving and environmental protection.
  • 【Usb charging】kitchen sink sensor water faucet - No need to change the battery frequently, use a USB cable to charge, charge for 3 hours, and use about 6 months. [Easy installation] Automatic Sensor Faucet Adapter, using supporting tools, only two steps, easy installation. 6 sets of adapters (internal M20/M22/G1/2 and external M20/M22/M24 adapters) are more widely used and Suitable for mainstream faucets in the market.
  • 【Perfect after-sales service】 Let you shop without worries! You will get: (quality problem) 6 months replacement, 1 year warranty and friendly customer service. If you have any questions about our products, please feel free to contact us, we will provide solutions within 24 hours.
sdc

Fossa Touchless Tap Adapter - household induction water economizer

 

  • A slight change gives you a big surprise.
  • An ordinary faucet is easily transformed into a smart device product.
  • You only need to replace the original faucet aerator with Fossa smart faucet to have a touchless auto-run faucet in your kitchen.

 

gfdrg

Side Sensor Meets Water Storage Requirements

qw
Bottom Sensor for Short-term Water Needs

 

  • When the sensor enters the bottom sensing area (within a limited distance of 10cm), the water began to flow out. When the sensor leaves, Water stops flowing out

 

Fossa Touchless Tap Adapter

DOUBLE SENSING MODES

 

  • When the sensor enters the side sensing area (within a limited distance of 5 cm), the water began to flow out. The current lasts for three minutes, and the water remains to flow out even if the sensory object leaves. If the sensor enters the side sensing area again during the water flow process, the water can be stopped at any time

 


wd

qd

qwfd

Innovative technoloay design

 

  • Innovative technology design, using MCU algorithm and pulse interval sampling to optimize the infrared induction, reduce product energy consumption and ensure the consistency and stability of the product use in a complex environment.

 

Air injection technique

 

  • Air injection technology increases the proportion of air in the process of water out, making the water spray soft and delicate, with more scouring power. At the same time, reduce the time of not being used effectively, so that the water flow rate reachec 0.07L/S. Water saving and environmental protection/ IPX6 Waterproof Grade

 

More adapters

 

  • 6 kinds of adapters, suitable for common mainstream faucets in the market
  • Internal Thread Connector M20 x 1
  • Internal Thread Connector M22 x 1
  • Internal Thread Connector G1/2 x 1
  • External Thread Connector M20 x 1
  • External Thread Connector M22 x 1
  • External Thread Connector M24 x 1

 


hjk

NOTE:

 

  1. Long-term storage of the product will cause a certain amount of power loss, and there may also be a situation where the power is exhausted. Therefore, we recommend: fully charge before the first use to obtain a longer use experience.
  2. When charging, the indicator light flashes; when the charging is completed, the indicator light goes out.
  3. Due to the extremely low usage rate of the USB cable and it is a general-purpose product for electronic equipment, in order to reduce the waste of resources, so the USB cable is not included in the package

 

Easy To Install & Removal

sd

6 kinds of adapters, suitable for common mainstream faucets in the market COMPATIBILITY CHECK !!!

 

  1. Before purchasing, please check whether your faucet interface is suitable for installation! or you can consult us in here, we will be happy to answer any questions about the product for you.
  2. Our products are only suitable for faucets with the above 6 mainstream interfaces. If your faucet interface is not within the range of the above 6 interfaces, you need to purchase a connector suitable for your faucet interface separately, connect to one of the above 6 types of connectors, and then Can be installed and used.

 

 

  • Product installation:

 

Retain the original faucet, Remove your original faucet aerator, select the appropriate connector in the set and screw it in (6 sets of connectors included), the main unit is pushed upwards, when you hear a click, the installation is complete

 

  • How to disassemble the water saver: (refer to the picture on the right)

 

It is recommended to keep the wrench in the package. If you need to remove the water saver for charging, place the wrench between the adapter and the self-locking ring, press the self-locking ring, and move the wrench upward to easily remove the water saver.

 

  • Important Hint: Do not violently disassemble, so as to avoid product damage!

 

wd

Common problem handling methods(1)

 

  • Water saver leaks after installation

 

 

  1. Please check whether the adapter is properly installed with a sealing ring.
  2. Whether the water saver has been pushed to the top to fully contact the adapter.
  3. Whether the bottom foamer has been tightened.

 

wd

Water saver leaks after installation

 
qf

No water comes out when using induction

 
as

The effluent is abnormal

 
sd

After a period of use, the water flow decreases


touchless bathroom sink faucet

w

wd

as

dfg

Specification:

 

  • Brand : Fossa
  • Weight: 105g
  • Size: 60x34x49mm
  • Standby Energy Consumption: 0.2mW
  • Working Water Pressure: 0.05-0.8MPa
  • Sensing Range Side Sensor 0-5cm/Bottom Sensor 0-10cm
  • Water Efficiency :Level 1
  • Protection Grade: IPX6
  • Charging Method: USB

 

Features

 

  • Upgrade double sensor for faucet, two sets of sensing areas, two water modes, 0.25 second fast induction
  • Drains water inductively by IR, touchless
  • First-class water efficiencyS
  • imple design style, adapt to various home styles 6
  • sets of adapters, meet your different needs.

 

Advantages:

 

  • Inductively drains water
  • Water saving
  • Convenient to disassemble and assemble
  • Super long battery endurance
  • Water overflow protection
  • IPX6 Waterproof

 

Package Included :

 

  • 1 x Infrared Induction Water Saving Device For Faucet
  • 1 x Installation Wrench
  • 3 x Seal Rings
  • 6 x Adapters
  • 1 x Instructions